2011 Polaris Ranger RZR ATV Service Manual, Page 92Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 92

ENGINE 19Once the gears are pressed together, firmly hold the gears together with one handCarefully remove the Tapered Pins
Tool (PU-45497-2) to align the teeth of the cam gears, as shown in the pictureNOTE: Install the Cam Gear Alignment Tool (PU45497-2)
into one assembly hole counter clockwise from the timing mark NOTE: This Cam Spanner Wrench (PU-45498) is only needed to
rotate the camshaft when the entire valve train is assembledIf the rocker arms are removed, the cam-shaft can be turned by
hand22Remove the bolt and nut from the balance shaft gearTry to remove the balance shaft gearIf the gear does not come off
manually, use the Flywheel Puller (PN 2871043) to remove the balance shaft gear 2871043 PU-45497-2 NOTE: For ease of installing