2011 Polaris Ranger RZR ATV Service Manual, Page 97Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 97

ENGINE 4Measure camshaft journal outside diameters (O.D ENGINE REASSEMBLY Crankcase Reassembly CAU ON After any reassembly
0.010 mm) PTO: 1.617" 0.00039" (41.07 0.010 mm) 6Calculate oil clearance by subtracting journal O.D.s from journal bore I.D.sCompare
to specification32Install oil baffle weldment (B)Torque bolts to specification Oil Baffle WeldmentOil Pick Up Bolt Torque:
60 inlbs(6.8 0.68 Nm) Install the balance shaftInspect balance shaft clearance (C) in both gearcase halvesRotate balance
shaft to ensure there is clearance between it and the oil baffle weldment = In mmCalculated Camshaft Oil Clearance: Std:
0.0027" (.070 mm) Limit: .0039" (.10 mm) NOTE: Replace camshaft if damaged or if any part is worn past the service limitNOTE:
Replace the engine crankcase assembly if camshaft journal bores are damaged or worn excessively 99231422011 RANGER RZRRZRRZR