2011 Polaris Ranger RZR ATV Service Manual, Page 99Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 99

ENGINE 10Lubricate connecting rods with PS-4 PLUS synthetic engine oil13Install piston assemblies into cylinder aligning
the cylinder14Position cylinder and piston assemblies onto the connecting rods and push the piston pins through the piston
and connecting rods 12Orientate the piston rings on the piston before installation into the cylindersSet the gaps of the
rings every 120 (see illustration below)1 Piston Ring Orientation Push in Piston Pins 15Install the piston pin circlipsThe
circlip ends should be installed at the 12 O'clock position 1Top Ring 2Second Ring 3Oil Ring Piston Pin Cirlcip in 12 O'clock