2011 Polaris Ranger RZR ATV Service Manual, Page 102Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 102

ENGINE 25Install counter balance shaft gear (J) with new key, aligning timing marks with crankshaft gear (I)Install washer
aligned Balance Shaft Gear Bolt Torque: 22 ftlbs(30 Nm) 26Use the Cam Gear Alignment Tool (PU-45497-2) to align the teeth
of the cam gear (M)Install the cam gear (M) (with the Cam Gear Alignment Tool still in place) onto the camshaftThe timing
marks on the camshaft gear should align with the keyway on the balance shaft gearPU-45497-2 Timing Marks Timing Marks NOTE:
If the timing mark on the camshaft gear does not align properly, remove the camshaft gear and toolUse the Cam Spanner Wrench