2011 Polaris Ranger RZR ATV Service Manual, Page 105Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 105

ENGINE NOTE: Before assembly, clean the bolts and bolt holes with Primer (PN 2874275) to remove any debrisThis will ensure
inlbs(10.85 1.35 Nm) 38Install water pump impeller (P)Secure the impeller with the washer and new nut (Q)Torque the nut to
specificationP Water Pump Housing Bolt Torque: 96 inlbs(10.85 0.35 Nm) Torque in proper sequence 40Sparingly apply Starter
Drive Grease (PN 2871423) to the starter driveInstall the starter bendixNOTE: There are thrust washers on both sides of starter