2011 Polaris Ranger RZR ATV Service Manual, Page 108Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 108

ENGINE 8Install breather reed (G) into rocker cover (H)Lightly apply black RTV sealant to the outer edges of the breather
84 inlbs(9.5 0.9 Nm) 12Install 38" coolant hose fitting (L) and torque to specification13Install temperature sender (K) and
torque to specification IMPORTANT: Before assembly, clean the bolts and bolt holes with Primer (PN 2874275) to remove any
debrisThis will ensure proper sealing when installing bolts10Install rocker coverTorque bolts in sequence to specification
Temperature Sender Torque: 17 ftlbs(23 Nm) Oil Pump Priming CAU ON After any reassembly or rebuild, the engine must be primed
using the Oil Priming Adapter (PU-45778) and 34-full oil filter before initial start-upFollow the steps in this section to