2011 Polaris Ranger RZR ATV Service Manual, Page 125Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 125

ELECTRONIC FUEL INJECTION 4If the resistance is correct- Test the main harness circuit between the sensor connector terminals
(2) remaining fasteners that attach the bracket to the side of the rear gearcase Serious injury may result if machine tips
or fallsBe sure the vehicle is secure before beginning this service procedure2If not done already; disconnect the CPS harness
connector (see illustration under "CPS Test") IMPORTANT: In order to remove the CPS, the rear portion of the exhaust system
and the mounting bracket between the transmission and rear gearcase will need to be removed3Remove the exhaust pipe between
the elbow pipe and the exhaust silencerRemove the exhaust silencerRemove the bolt from the bracket at the front of the rear