2011 Polaris Ranger RZR ATV Service Manual, Page 130Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 130

ELECTRONIC FUEL INJECTION Fuel Injector Replacement 12Be sure the engine has cooled enough to work onRemove the seats and
Here 67Thoroughly clean the area around the fuel injectors including the throttle body manifoldUsing mm hex wrench, loosen
the fuel rail mounting screw from the cylinder headCarefully pull the rail away from the injectors and remove the injector(s)
from the cylinder head along with the harnessMounting Screw Fuel Injectors Disconnect the harness for the fuel injector(s)
located next to the ignition coilCut the plastic tie strap and push the harness for the fuel injector(s) up over the air
box to allow fuel injector removal IMPORTANT: Take note of PTO and MAG fuel injector harness connectors before disconnecting
themThe harnesses are different and can not be connected incorrectly (PTOGray; MAGBlack)Fuel Injector Harnesses Fuel Rail
Reverse the previous steps to install the new injector(s) and reassembleLubricate O-rings lightly with oil to aid installationTorque