2011 Polaris Ranger RZR ATV Service Manual, Page 145Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 145

ELECTRONIC FUEL INJECTION CAMSHAFT PHASE SENSOR Operation Overview Mounted on the engine crankcase, the Cam Phase Sensor
seat Camshaft Phase Sensor The Cam Phase Sensor provides camshaft position information to the ECU to be used along with the
crankshaft position data to allow for sequential spark and ignition timing Cam Phase Sensor Test The Cam Phase Sensor is
non-serviceable itemIf it is faulty, it must be replacedWith the ignition key switch on, the sensor should have battery voltage
present on the RedDark Blue wire and ground present on the Brown wire6Install the retaining bolt and torque to specification
Cam Phase Sensor Retaining Bolt Torque: 50 inlbs(5.65 .55 Nm) NOTE: Use Digital WrenchTM Diagnostic Software (dealer only)