2011 Polaris Ranger RZR ATV Service Manual, Page 148Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 148

ELECTRONIC FUEL INJECTION EFI DIAGNOSTICS Instrument Cluster Trouble Code Display NOTE: The diagnostic mode is accessible
number equates to the suspected area of fault (SPN) The third number (located bottom right) can be to digits in lengthThis
number equates to the fault mode (FMI) 452Press and hold the MODE button to enter the diagnostics code menu If more than
one code exists, press the MODE button to advance to the next trouble codeTo exit the diagnostic mode, press and hold the
MODE button or turn the ignition key OFF once the codes are recorded DIAGNOSTIC TROUBLE CODE TABLE Component Throttle Position
Sensor (TPS) Condition Voltage Too High Voltage Too Low Data Erratic or Intermittent (or missing) Received Vehicle Speed
Has Error Digital WrenchTM P-Code P0123 P0122 P0503 C1069 P0108 P0107 P0113 P0112 P0118 P0117 P0217 P1217 Vehicle Speed Signal
Manifold Absolute Pressure Sensor Voltage Too High (T-MAP) Voltage Too Low Intake Air Temperature (T-MAP) Voltage Too High
Voltage Too Low Voltage Too High Engine Temperature Sensor (ECT) Voltage Too Low Temperature Too High Engine Overheat Shutdown