2011 Polaris Ranger RZR ATV Service Manual, Page 164Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 164

BODYSTEERINGSUSPENSION CAB FRAME (RZRRZR S) AssemblyRemoval NOTE: Finger tighten all components until cab frame is completely
bolts and (516-18) nutsTighten bolts to 16-18 ftlbs(22-24 Nm)Fasten the two self-tapping screws to the rear inner portion
of the bracket on each sideTighten screws to 15 ftlbs(20 Nm)Place the straps from the safety net over the front coupler postsFasten
the front of the cab frame to the base brackets and secure with four (38-16 14) screws and (38-16 Nyloc) nutsTighten screws
to 25-28 ftlbs(34-38 Nm)Attach side bars to cab frame using M6 screws and nuts on top and M8 screws and nuts on the bottomTighten