2011 Polaris Ranger RZR ATV Service Manual, Page 180Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 180

BODYSTEERINGSUSPENSION 67Disconnect all electrical dash components noting their location and wire routingRemove the dash
bumper to the frame (see "Rear Bumper")Remove the (4) screws from the middle of the cargo box Remove 4Remove the (4) Torx
screws that attach the front portion of the cargo box to the frameRemove the (6) Torx screws and (2) push rivets that attach
the rocker panels to the cargo box on each sideDisconnect the taillight harness from the chassis harness located above the
airbox and remove the cargo box assembly from the vehicleDisconnect Harness Rear Fender, Flair and Tie Down Removal 123Remove
the rear bumper (see "BODY COMPONENT REMOVALRear Bumper")Remove the push rivets that retain the rear portion of the rocker
panels to the rear fendersRemove the (3) push rivets (RZR) or (8) T27 Torx screws (RZR-SRZR-4) and remove the fender flair56
Tie-Down Airbox Torx Screws Push Rivet Fender Push Rivets Fender Flair Standard RZR Shown 99231422011 RANGER RZRRZRRZR Service