2011 Polaris Ranger RZR ATV Service Manual, Page 181Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 181

BODYSTEERINGSUSPENSION Rocker Panels, Console and Floor Rocker Panel Removal 1Remove the push rivets and Torx screws retaining
the (8) fasteners that retain the upper portion of the mid cab frameUsing care, remove the mid cab frame from the vehicle
as an assembly Push Rivets Screws NOTE: If removing RH rocker panel from RZR 4, reinstall the gas cap once panel is removedConsole
and Lower Floor Removal (RZRRZR S) 123Remove both seats and rocker panels (see "Rocker Panel Removal")Remove the T27 screws
retaining the console to the floorRemove the shift handle knob and remove the console945Remove the Torx screws retaining
the upper floor to the lower floorRemove the Torx screws retaining the rear portion of the floor and remove the lower floor