2011 Polaris Ranger RZR ATV Service Manual, Page 196Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 196

BODYSTEERINGSUSPENSION REAR A-ARMS Removal The following procedure details upper and lower A-arm removal and replacement
bar linkage, remove the lower nut retaining the linkage to the lower A-arm Remove lower linkage nut 2Upper A-arm Removal
1Remove the fastener (A) attaching the upper A-arm to the bearing carrierE Remove the fastener (C) retaining the lower portion
of the shock to the lower A-arm Standard RZR Shown Remove the fastener (B) attaching the upper A-arm to the frame and remove
the upper A-arm from the vehicleExamine bushings and pivot tubes (see "Exploded View" on page 5.41)Replace if wornDiscard
hardwareIf not replacing the A-arm, thoroughly clean the a-arm and pivot tubes Remove the fastener (D) attaching the lower
A-arm to the bearing carrierRemove the (2) fasteners (E) attaching the lower A-arm to the frame and remove the lower A-arm