2011 Polaris Ranger RZR ATV Service Manual, Page 208Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 208

BODYSTEERINGSUSPENSION FOXTM Shock Disassembly NOTE: Read through all of these instructions first to familiarize yourself
shockIf your shock has polyurethane bushings and sleeves, remove them from both ends of the shock (Fig1)Figure 786Clean the
entire shock assembly with soapy waterTry to remove as much dirt and grime as possible by scrubbing with soft bristle brushNever
pressure wash your shock, as this can force water and debris inside which will damage the sealsDry the shock assembly with
compressed air, if available, or use clean towelsUse 332" Hex Key to remove the button head screw from the FOXTM air valve
in the reservoir end capSecurely clamp FOXTM Nitrogen Safety Needle in viseFigure 2 Point air valve away from face and body
when charging or discharging any shock9Insert the FOXTM Safety Needle squarely into center of gas valve (Fig3)Figure 3 Note
and record the setting on the Compression Adjuster ScrewUsing the Flat Blade Screwdriver, count the clicks as you turn the