2011 Polaris Ranger RZR ATV Service Manual, Page 231Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 231

CLUTCHING 4Reinstall the driven clutch and drive beltTorque the driven clutch retaining bolt to 17 ftlbs(23.5 Nm)Be sure
17 ftlbs(23.5 Nm) Do not leave the vehicle unattended11Reinstall the rear seat base assembly and torque the mounting bolts
to 40 ftlbs(54 Nm)12Reinstall the rear service panel and seatsInspect the belt to sheave clearance againIf the belt rests
evenly between the drive clutch stationary and moveable sheaves, the offset is correct and the vehicle can be reassembled
(see Step 7)If the belt is still contacting either sheave, remove the drive belt and driven clutchAdd or remove offset washers
behind the driven clutch accordingly Correct Offset .030" Offset WasherPN 7556454 .060" Offset WasherPN 7556120 6Reinstall
the driven clutch and drive beltTorque the driven clutch retaining bolt to 17 ftlbs(23.5 Nm)Be sure to rotate the driven
clutch counterclockwise several times to ensure the belt is tight and riding at the proper height in the clutchThe belt should