2011 Polaris Ranger RZR ATV Service Manual, Page 241Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 241

CLUTCHING Cover Bushing Removal 1Install main adapter (Item 8) on pullerRemoval Tool (3) Nut (C) Clutch Assembly NOTE: It
from puller rod and set asideRemove bushing and bushing removal tool from pullerDiscard bushingPiston Pin Puller 12Install
moveable sheave onto fixed sheaveInstall spider spacersUse same quantity and thickness as were removed Cover Bushing Installation
123456Apply Loctite 609 evenly to bushing bore in cover Working from inside of cover, insert new bushing and bushing installation
tool into center of clutch coverWith main adapter on puller, insert cover onto puller rod, placing outside of cover toward
viseInstall nut on rod and hand tightenTurn puller barrel to apply more tension if neededTurn clutch cover counterclockwise
on puller rod until bushing is seatedRemove nut from puller rodTake installation tool and clutch cover off rod3Spacer washers
Compress spider buttons for each tower and install spider, making sure that "X", or the marks that were made earlier, on