2011 Polaris Ranger RZR ATV Service Manual, Page 246Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 246

CLUTCHING TROUBLESHOOTING Situation Engine RPM below specified operating range, although engine is properly tunedProbable
incorrect for application -Install correct recommended shift weights(too light)-Drive clutch bindingEngine RPM above specified
operating range-Driven clutch binding-Disassemble and clean clutch, inspecting shift weights and rollersReassemble without
the spring and move sheaves through entire range to further determine probable cause-Disassemble, clean, and inspect driven
clutch, noting worn sheave bushing and ramp buttons and helix spring location-Clean sheaves with denatured alcohol or brake
cleaner, install new belt-Replace belt -Converter sheaves greasy; belt slipage-Drive belt worn too narrowHarsh drive clutch
engagement -Excessive beltsheave clearance with new belt-Perform beltsheave clearance adjustment with shim washers beneath
spiderDrive belt turns over -Wrong belt for application-Replace with correct belt-Abuse (continued throttle application when