2011 Polaris Ranger RZR ATV Service Manual, Page 251Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 251

FINAL DRIVE 6Remove the two front brake caliper mounting bolts and remove the caliper from the brake disc (see Chapter 9)CAUTION:
evenly by tapping on outer race onlyOnce bearing is at bottom of casting, support casting on outer edges so bearing can be
removedInspect the bearing carrier housing for scratches, wear or damageReplace front bearing carrier if damaged 411Rotate
bearing by hand and check for smooth rotationVisually inspect bearing for moisture, dirt, or corrosionNOTE: Due to extremely
close tolerances and minimal wear, the bearings must be inspected visually, and by feelWhile rotating bearings by hand, inspect
for rough spots, discoloration, or corrosionThe bearings should turn smoothly and quietly, with no detectable up and down