2011 Polaris Ranger RZR ATV Service Manual, Page 255Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 255

FINAL DRIVE Drive ShaftCV Joint Handling Tips Care should be exercised during drive shaft removal or when servicing CV jointsDrive
are replaced and when joints are cleanedRefer to text for grease capacity of CV joints and CV joint boots7Pull shaft to remove
from CV joint 5Remove the small clamp and boot from the drive shaft4Make sure the circlip remains on the shaft and not left
in the jointDiscard the circlip as it will be replacedCirclip IMPORTANT: If the grease in the joint is obviously contaminated
with water andor dirt, the joint should be replaced6Thoroughly clean the joint with an appropriate solvent and dry the joint
to prevent any residual solvent from being left in the joint upon reassemblyVisually inspect the joint by tilting the inner
race to one side to expose each ballSevere pitting, galling, play between the ball and its cage window, any cracking or damage
to the cage, pitting or galling or chips in raceways call for joint replacementApply light coat of grease to the end of the