2011 Polaris Ranger RZR ATV Service Manual, Page 262Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 262

FINAL DRIVE 6Apply Loctite 242TM to the set screw threads and torque the (2) bearing set screws to specification65-75 inlbs(7.3-8.4
and mark inner and outer yoke for correct repositioning during installation2Support inner yoke as shown and drive outer yoke
down (bearing cap out) with soft face hammer Install the rubber isolator over the bearingInstall the upper and lower halves
of the bearing support along with the (2) fastenersTorque the support bearing fasteners to specification Support Bearing