2011 Polaris Ranger RZR ATV Service Manual, Page 271Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 271

FINAL DRIVE NOTE: Install the roll cage so that the ring gear grooves line up with the roll cage slots (see below)8Check
gearBe sure the armature plate tabs are fully engaged into the roll cage assembly and are resting on the cut-grooves of the
ring gear Engage Tabs 7Align the spring retainer dowel pin with the ring gear dowel pin and install the retainer on top of
the torsion springNOTE: Verify armature plate tabs are in the slots on the roll cage and are resting in the ring gear grooves10Carefully