2011 Polaris Ranger RZR ATV Service Manual, Page 272Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 272

FINAL DRIVE 11Install new O-ring on the cover plate assemblyNOTE: Be sure the square O-ring is placed flat on the cover surfaceIf
onto the gearcase housingInstall the (7) cover plate screws and torque to specificationTorque Screws 4 Install the propshaft
onto the front gearcase input shaftUse NEW spring pin in the front propshaftInstall the (4) bolts that secure the front gearcase
to the frame and torque to 30 ftlbs(41 Nm)Install the vent lineInstall Vent Line Connect Harness Gearcase image is for reference