2011 Polaris Ranger RZR ATV Service Manual, Page 278Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 278

FINAL DRIVE 6Remove the bolt that attaches the rear bearing carrier to the upper A-arm Outer CV JointBoot Replacement 1Using
the boot down the shaftGrasp the rear drive shaft and pull sharply outward on the shaft to disengage it from the rear gearcasewhen
removing to prevent Clean the grease from the face of the jointPlace the drive shaft in soft-jawed viseUsing soft-faced hammer,
or brass drift, strike the inner race of the joint to drive the joint off the drive shaftBe sure to tap evenly around the