2011 Polaris Ranger RZR ATV Service Manual, Page 280Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 280

FINAL DRIVE 13Slide the joint onto the drive shaft splines and align the circlip with the lead-in chamfer on the inner race
sure it is securely locked in place16Remove excess grease from the CV joint's external surfaces and place the excess grease
in the boot17Pull the boot over the joint and position the boot lips into the grooves on the joint housing and shaftMake
sure the boot is not dimpled or collapsed18Install and tighten the large clamp using the appropriate clamp tool20Install
and tighten the small clamp on the boot using the appropriate clamp tool Axle Boot Clamp Tool: PU-48951 or CV Boot Clamp
Pliers: 8700226 Axle Boot Clamp Tool: PU-48951 or CV Boot Clamp Pliers: 8700226 99231422011 RANGER RZRRZRRZR Service Manual