2011 Polaris Ranger RZR ATV Service Manual, Page 286Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 286

FINAL DRIVE 7Pull the rear gearcase towards the rear of the vehicle to disengage it from the transmission NOTE: If the splined
at the factory which requires special OEM tooling in order to properly assemble and shim the gearsIn the event damage to
the gears or housing requires replacement, the entire assembly must be replaced12Drain and properly dispose of used gearcase
fluidRemove the remaining cover screws from the rear gearcaseNOTE: Record the thickness of the shim pack located under each
bearingKeep the shims together for reassembly4Inspect each axle spool bearing and race for signs of wear or damageReplace
races if required using standard bearing puller toolsRemove the ring gearaxle spool assemblyThe bearings are slip-fit and