2011 Polaris Ranger RZR ATV Service Manual, Page 309Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 309

TRANSMISSION 8After removing the cover, remove the intermediate shaft bearing cup and shims from the coverBearing cup is
or wornCheck bearings for wear or damage and replace as needed using press and standard bearing removal toolsDiscard removed
bearings as they become damaged by the removal process 11Disassemble the output pinion shaft assembly by removing the retaining
screws on the bearing cupbracket assemblyReplace the output shaft sealThe output pinion shaft can be disassembled as shown
using press and standard bearing removal tools 12Output shaft bearing cup is slip-fitRemove, note and record the number and
thickness of shims and set asideNote the alignment dowels (circled) in the cover for installation 99231422011 RANGER RZRRZRRZR