2011 Polaris Ranger RZR ATV Service Manual, Page 312Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 312

TRANSMISSION 5Reinstall the intermediate pinion shaft assembly and bearing cup7Install the transfer case coverAlign the dowels
tools(needle bearing is installed round edge inward) Install new shaft seal flush with the surface, the shims and bearing
cupApply thin coat of sealant to the mating surfacesApply lubricant to the seal lip8 Transfer Case Cover Screws: 23-27 ftlbs(31-37
Nm) Reinstall the transmission to rear gearcase mount bracketHand tighten all fasteners first, then torque fasteners to specificationUse