2011 Polaris Ranger RZR ATV Service Manual, Page 329Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 329

BRAKES MASTER CYLINDER Removal 1Locate the master cylinder above the left front tire in the wheel well areaNOTE: Make note
BRAKE PEDAL LEVER 2Remove the clip (A) from the clevis pin (B) that attaches the master cylinder to the brake pedal leverB
17 ftlbs(23 Nm) Pedal Removal 12Locate the brake pedal lever (L) and remove the master cylinder clevis pin (B) and clip (A)Remove
the E-ring (E) from the pedal mount and remove the brake pedal lever (L) from the vehicleL E 15 ftlbs(20 Nm) Pedal Installation
1Reverse "Removal" steps to install brake pedal leverBrake pedal freeplay should not exceed .090" (2.28 mm)Place container
to catch brake fluid under the master cylinder brake line banjo bolts (C) Brake Pedal Freeplay: .090" (2.28 mm) Brake fluid