2011 Polaris Ranger RZR ATV Service Manual, Page 333Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 333

BRAKES 4Slowly pump the brake pedal until pressure has been built upMaintain at least 12, (12.7 mm) of brake fluid in the
nuts to specification Wheel Nuts: Steel Wheels: 27 ftlbs(37 Nm) Aluminum Wheels: 30 ftlbs+ 90 (14 turn) Brake Burnishing
Procedure It is required that burnishing procedure be performed after installation of new brake pads to extend service life
and reduce noiseStart machine and slowly increase speed to 30 mphGradually apply brakes to stop machineAllow pads and disc
to cool sufficiently during the procedureDo not allow pads or disc to become hot or warping may resultRepeat this procedure