2011 Polaris Ranger RZR ATV Service Manual, Page 338Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 338

BRAKES Caliper Assembly 1Install new O-rings in the caliper bodyBe sure the grooves are clean and free of residue or brakes
the mounting bracket pins with silicone grease and install the rubber dust seal bootsApply Grease to Each Bracket Pin Front
Caliper Mount Bolt Torque: 31-34 ftlbs(42-46 Nm) 3Torque the banjo bolt to the proper torque specificationRZRRZR S 15 ftlbs(20
Nm) 4Compress the mounting bracket and make sure the dust seal boots are fully seatedInstall the brake padsClean the disc
and pads with brake parts cleaner or denatured alcohol to remove any dirt, oil or grease Caliper Installation 12Install the