2011 Polaris Ranger RZR ATV Service Manual, Page 339Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 339

BRAKES 4Install the adjustment set screw and turn clockwise until stationary pad contacts disc, then back off 12 turn (counterclockwise)
30 ftlbs+ 90 (14 turn) 7Field test unit for proper braking action before putting into serviceInspect for fluid leaks and
firm brakesMake sure the brake is not dragging when pedal is releasedIf the brake drags, re-check assembly and installation
Brake Disc Runout Service Limit .010" (.254 mm) Disc Inspection 12Visually inspect disc for scoring, scratches, or gougesReplace
the disc if any deep scratches are evidentUse 0-1" micrometer and measure the disc thickness at eight different points around