2011 Polaris Ranger RZR ATV Service Manual, Page 346Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 346

BRAKES Caliper Installation 1Install the rear caliper with the mounting boltsTorque mounting bolts to specification18 ftlbs(24
mm) Service Limit: .170" (4.32 mm) Brake Disc Thickness Variance Service Limit .002" (.051 mm) difference between measurements
3Mount dial indicator and measure disc runoutSlowly rotate the disc and read total runout on the dial indicatorReplace the
disc if runout exceeds specifications Install the pad adjustment screw and turn until stationary pad contacts disc, then
back off 12 turnFollow bleeding procedure outlined earlier in this chapterInstall wheel and torque wheel nuts to specification
Brake Disc Runout Service Limit .010" (.254 mm) Wheel Nuts: Steel Wheels: 27 ftlbs(37 Nm) Aluminum Wheels: 30 ftlbs+ 90 (14