2011 Polaris Ranger RZR ATV Service Manual, Page 347Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 347

BRAKES Disc Replacement 123Remove rear brake caliper (see "REAR CALIPER SERVICE")Remove wheel hub cotter pin, castle nut
Caliper Overheats (Brakes Drag) Compensating port plugged Pad clearance set incorrectly Brake pedal binding or unable to
return fully Residue build up under caliper seals Operator riding brakes Brakes Lock Alignment of caliper to disc Caliper
pistons sticking Always use new brake disc mounting boltsThe bolts have pre-applied locking agent which is destroyed upon
removal678Install wheel hub assembly, washers, and castle nutTorque castle nut to 80 ftlbs(108 Nm) and install new cotter
pinInstall rear caliper (see "REAR CALIPER SERVICE")Follow bleeding procedure outlined earlier in this chapterField test
unit for proper braking action before putting into serviceInspect for fluid leaks and firm brakesMake sure the brake is not
dragging when pedal is releasedIf the brake drags, re-check assembly and installation Improper assembly of brake system components