2011 Polaris Ranger RZR ATV Service Manual, Page 351Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 351

ELECTRICAL Headlamp Switch 1Disconnect the headlamp switch harness by depressing the connector locks and pulling on the connectorDo
Key Switch 1Disconnect the key switch harness by lifting the connector lock and pulling on the connectorDo not pull on the
wiringTest between the sets of outputs (OFFONSTART)If any of the tests fail, replace ignition switch assembly Turn the ignition
key to ONThere should be continuity between switch pins and D; and Turn the ignition key to STARTThere should be continuity