2011 Polaris Ranger RZR ATV Service Manual, Page 352Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 352

ELECTRICAL Ignition Key Switch (INT'L) 1Disconnect the key switch harness by lifting the connector lock and pulling on the
the ignition key to ONThere should be continuity between pins and D; and Turn the ignition key to STARTThere should be continuity
between pins and B; and D; and F AWD2WD Switch 1Disconnect the AWD2WD switch harness by depressing the connector locks and
pulling on the connectorDo not pull on the wiringTest between the sets of outputs (AWD2WD)If any of the tests fail, replace