2011 Polaris Ranger RZR ATV Service Manual, Page 354Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 354

ELECTRICAL Transmission (Gear Position) Switch 1Disconnect the transmission switch harness by lifting the connector lock
Special Tools Required: Static Timing Light Harness (PN 2871745) Hall Sensor Probe Harness (PN 2460761) 12Disconnect the
wire harness from the speed sensor and remove the sensor from the transmissionConnect the wires from the Static Timing Light
Harness to the sensor pin connector using the Hall Sensor Probe Harness (PN 2460761)Pass screwdriver back and forth in front
of the sensor tipBe sure connections are good and 9V battery is in good conditionIf the light flashes, the sensor is good