2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 220Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 220

CLUTCHING Assembly 1Inspect PVT inner cover-to engine sealReplace if cracked or damagedApply RTV Silicone Here 7Install clutch
retainer plate and tighten screws securelyB 9Apply light film of grease to the splines on the shaft10Install the driven clutch,
washer, lock washer, and retaining boltTorque to specification11Clean end of taper on crankshaft and the taper bore inside
drive clutch12Install drive clutch and torque the NEW retaining bolt to specification13Reinstall drive belt noting direction
of rotationIf new belt is installed, install so numbers can be easily read14Replace PVT outer clutch cover rubber gasket15Reinstall
PVT outer clutch cover and secure with screwsTorque to specification Seal outer edge to cover with RTV silicone sealant 6Torque