2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 228Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 228

CLUTCHING Spider Removal 1Install clutch in holding fixture and loosen the spider (counterclockwise) using Clutch Spider
if more brass than Teflon is visible on the bushingRefer to bushing replacement in this chapter3Inspect all rollers, bushings
and roller pins by pulling flat metal rod across the rollerTurn roller with your fingerIf you notice resistance, galling,
or flat spots, replace rollers, pins and thrust washers in sets of threeAlso inspect to see if roller and bushing are separatingBushing
must fit tightly in rollerUse the Roller Pin Tool (PN 2870910) to replace rollers and pinsTake care not to damage roller
bushing or bearing surface of the new pin during installation 4Rubber-backed buttons can and should be used in all ATV clutches