2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 230Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 230

CLUTCHING Bearing Inspection 1Rotate non-braking clutch bearing in both clockwise and counter-clockwise directionsThe non-braking
following instructions for drive clutch removal, then proceed as follows: 1Remove the moveable sheave spacer (1) and the
thrust washer (2)Visually inspect the washer for damage2Measure the thickness and compare to specificationReplace if worn
or damaged1 = In mmThrust Washer Thickness Standard: .030" (.76mm) Service Limit: .025" (.64mm) 3Remove the moveable clutch