2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 235Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 235

CLUTCHING 3Inspect all rollers, bushings and roller pins by pulling flat metal rod across the rollerTurn roller with your
inspect surface of towersSee "Spider Removal" procedure Button to Tower Clearance: .000-.001 2Inspect sheave surfacesReplace
the entire clutch as an assembly if worn, damaged or cracked Shift Weight Inspection 4Rubber-backed buttons can and should
be used in all ATV clutches if the hollow roller pin is changed to solid roller pinNOTE: Rubber side of the button is positioned
toward the solid roller pinIt is recommended to switch all buttons to the rubber version during service (if needed)1If clutch
is not disassembled, inspect as shown, using clutch holding tool to compress the moveable sheaveThe contact surface of the