2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 241Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 241

CLUTCHING 2Apply Loctite 609 evenly to bushing bore inside moveable sheave3Set bushing in place on sheave4Insert installation
bore in cover2Working from inside of cover, insert new bushing and bushing installation tool into center of clutch cover3With
main adapter on puller, insert cover onto puller rod, placing outside of cover toward vise4Install nut on rod and hand tightenTurn
puller barrel to apply more tension if needed5Turn clutch cover counterclockwise on puller rod until bushing is seated6Remove
nut from puller rodTake installation tool and clutch cover off rod Adapter Reducer (9) Main Adapter (8) 2Install adapter
reducer (Item 9)3From outside of clutch cover, insert removal tool (Item 3) into cover bushing4With inside of cover toward
vise, slide cover onto puller5Install nut onto puller rod and hand tightenTurn puller barrel to increase tension as needed6Turn