2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 244Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 244

CLUTCHING Bushing Service Bushings are installed at the factory using LoctiteTMIn order to remove the bushing it will be
Reducer (#9) (PN 5010279) onto the puller, sliding it inside the main adapter 6Install sheave onto puller7Install nut onto
puller rod and tighten by handTurn puller barrel for further tension if needed8Turn clutch sheave counterclockwise until
bushing is removedRepeat Stepsfor other bushing4Using an appropriate heat gun, apply heat directly on bushing until tiny
smoke tailings appear CAUTION Clutch components will be hot! In order to avoid serious burns, wear heat resistant insulated
gloves for the rest of the removal process 9Remove nut from puller rod and set aside10Remove adapters from puller11Remove
bushing and removal tool from adaptersDiscard bushing 99234122012 Sportsman 400500 and EFI Tractor Service Manual Copyright