2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 261Get this manual
FINAL DRIVE FRONT HUB Disassembly NOTE: Follow steps 1-10 for wheelhub removal in Front Drive Shaft (CV) ServiceRemoval'
outer bearing race with drift punch in the reliefs as shown NOTE: Drive bearing out evenly by tapping on outer race onlyOnce
bearing is at bottom of casting, support casting on outer edges so bearing can be removed3Inspect the bearingNOTE: Due to
extremely close tolerances and minimal wear, the bearings must be inspected visually, and by feelWhile rotating bearings
by hand, inspect for rough spots, discoloration, or corrosionThe bearings should turn smoothly and quietly, with no detectable