2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 270Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 270

FINAL DRIVE ReassemblyInspection NON ADC 1Replace all O-rings, seals, and worn components5Install the LH output hub (A) into
wear, the bearings must be inspected visually, and by feelWhile rotating bearings by hand, inspect for rough spots, discoloration,
or corrosionThe bearings should turn smoothly and quietly, with no detectable up and down movement and minimal movement side
to side4Install input shaft, bearing, snap ring, and input cover with new o-ringTorque bolts to specification 7Install the
rollers and roll cage into the ring gearInsert the rollers as the roll cage is installed Input Cover Bolt Torque 7-11 ftlbs