2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 282Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 282

FINAL DRIVE 11Inspect roll cage sliding surface (2)This surface must be clean and free of nicks, burrs or scratchesRemove
operationNOTE: See page 7.20 "Front Gearcase Diagnosis" on 1 13Inspect the magnetic coil (1) in the outer cover plate assemblyInspect
the backlash pad (2) for excessive wear1 2 16Remove the splined armature plate (1) NOTE: See "FRONT GEARCASE DIAGNOSIS" in
this chapterNOTE: Ring gear backlash (2) is set at the factoryNo adjustment is required, unless the front cover is replaced
or the back lash pad screw is removedSee the "FRONT GEARCASE ASSEMBLY" in this chapter for details on backlash setting 99234122012