2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 303Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 303

FINAL DRIVE 17Pull on the joint to test that the circlip is seated and that the joint is securely fastened to the shaft18Remove
and tighten the small clamp using the Axle Boot Clamp Tool (8700226 or PU-48951)22Position the boot lip in its grooveInstall
and tighten the large clamp using the Axle Boot Clamp Tool Axle Boot Clamp Tool 8700226 or PU-48951 Axle Boot Clamp Tool
8700226 or PU-48951 21Pull out on the drive shaft to center the joint in the housingSlide straight O-ring pick or small slotted