2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 306Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 306

FINAL DRIVE Assembly 1Install new bearing caps in yoke by handCarefully install U-joint cross with grease fitting properly
supporting cross shaft and tapping on each corner as shown 2Using suitable arbor, fully seat bearing cap in one sideContinually
check for free movement of bearing cross as bearing caps using suitable arbor, fully seat bearing cap in one sideContinually
check for free movement of bearing cross as bearing caps are assembledare assembled 7When installation is complete, yokes
must pivot freely in all directions without bindingIf the joint is stiff or binding, tap the yoke lightly to center the joint