2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 351Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 351

BRAKES 9Measure the thickness of the pad materialReplace pads if worn beyond the service limit3Install caliper and torque
mounting bracket pins with light film of disc brake caliper lube, and install rubber dust boots2Compress mounting bracket
and make sure dust boots are fully seatedInstall pads with friction material facing each other WARNING If brake pads are
contaminated with grease, oil, or liquid soaked do not use the padsUse only new clean pads 6Verify fluid level in reservoir
is up to the MAX line inside reservoir and install reservoir cap7Install wheel(s) and torque wheel nut(s)8It is recommended
that burnishing procedure be performed after installation of new brake pads to extend service life and reduce noise 99234122012