2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 406Get this manual

2012 Sportsman 400/500 and EFI Tractor Service Manual 9923412, Page 406

ELECTRICAL Starter Reassembly CAUTION Use care when handling starter housingDo not drop or strike the housing as magnet damage
sure it is in good condition and not twisted on the case5Align casing marks and install housing, pushing back brushes while
installing shaft in bushing6Reinstall starter motor housing boltsMake sure ORings are in good condition and seated in groove7Align
brush plate and install cover and screws8Install the starter onto the engine caseHand tighten the starter boltTorque the
bolt to ft.lbs(12 Nm) Starter Exploded View Starter Solenoid Bench Test To measure the resistance of the pull-in coil, connect
one meter lead to the solenoid lead wire and the other to groundThe resistance should be 3.7 ohms Refer to "Electric Starter